Productivity Analysis of Production Units using Objective Matrix and Root Cause Analysis Methods

Ayyasy Nugroho, Enny Aryanny

Abstract


PT XYZ is a company engaged in the liquefied petroleum gas (LPG) processing industry. In recent years, the company has faced significant fluctuations in production, deviating from its established targets. This issue has led to a decline in productivity over time. To address this, the study applies the Objective Matrix (OMAX) method to analyze key performance factors measuring LPG productivity from October 2023 to September 2024. The OMAX calculations reveal fluctuations, with the highest achievement recorded in August 2024 at 961.8 and the lowest in February 2024 at 173. Root Cause Analysis (RCA) was conducted to identify the primary causes of productivity decline, uncovering three critical factors: raw materials (Ratio 1), machine operating hours (Ratio 3), and idle machine hours (Ratio 4). These factors significantly contributed to reduced productivity due to unstable feed gas supply, high contamination levels affecting feed gas quality, machine downtime, and insufficient supervision and employee training. To enhance LPG productivity in the future, this study recommends several improvement strategies, including the development of gas exploration and extraction, strengthening raw material quality monitoring systems, implementing a more structured maintenance and repair plan, and providing intensive training programs for workers.

Keywords


Liquefied Petroleum Gas, Objective Matrix, Produktivitas, Root Cause Analysis

Full Text:

PDF

References


S. Hutasoit, M. Yuwono dan E. Susilowati, “Analisis Implementasi dan Efektivitas Program Mitigasi di LEMIGAS Tahun 2023,” AKADEMIK Jurnal Mahasiswa Ekonomi & Bisnis, vol. 4, no. 3, pp. 1065-1076, 2024.

A. Pawawoi, D. Wandi dan J. Ramadhan, “Rancangan Alat Konversi Bahan Bakar Minyak ke Bahan Bakar Gas Guna memenuhi Kebutuhan Gas Rumah Tangga,” Jurnal Andalas: Rekayasa dan Penerapan Teknologi, vol. 1, no. 2, pp. 76-81, 2021.

H. Effendy, B. R. Machmoed dan A. Rasyid, “Pengukuran dan Analisis Produktivitas menggunakan Metode Objective Matrix (OMAX),” Jambura Industrial Review, vol. 1, no. 1, pp. 40-47, 2021.

M. L. Singgih dan K. Gunarta, Manajemen Produktivitas Perusahaan, Surabaya: Tekno Sains Publisher, 2021.

Y. Indriani, R. K. Sari dan S. Marwa, “Analisis Objective Matrix (OMAX) untuk menentukan Produktivitas Produksi,” Journal of Engineering Science and Technology Management, vol. 4, no. 1, pp. 27-32, 2024.

A. J. Nugroho, Tinjauan Produktivitas dari Sudut Pandang Ergonomi, Padang: PACE Padang, 2021.

J. Budhiawan, E. Rimawan, J. G. Ganap dan E. Mayasari, “Productivity Analysis using Objective Matrix (OMAX) and Five Whys Analysis Methods On Rubber Powder Production Line at PT Tiga Bintang Gautama,” International Journal of Innovative Science and Research Technology, vol. 6, no. 8, pp. 1216-1223, 2021.

I. W. Ardhyani, M. Anshori, N. Yucha, G. Adriansyah, A. Alfian dan R. A. Pramudita, “Analysis of GC Coffee Product Quality at PT. X,” IQTISHA Dequity Journal Management, vol. 6, no. 1, pp. 74-83, 2023.

S. H. Sakdiyah, N. Eltivia dan A. Afandi, “Root Cause Analysis using Fishbone Diagram: Company Management Decision Making,” Journal of Applied Business, Taxation and Economics Research (JABTER), vol. 1, no. 6, pp. 566-576, 2022.

F. Huda dan A. E. Apsari, “Pengukuran Produktivitas dalam Meningkatkan Hasil Produksi menggunakan Metode Objective Matrix dan Pendekatan Root Cause Analysis,” Jurnal Ilmiah Research Student, vol. 1, no. 4, pp. 323-328, 2024.

A. Wicaksono dan A. Z. A. Faritsy, “Analisis Perhitungan dan Perbaikan Tingkat Produktivitas pada Area Servis Tabung Gas menggunakan OMAX,” Cosmic Jurnal Teknik, vol. 2, no. 2, pp. 86-98, 2024.

A. Setyadi, “Partial Productivity Analysis of Production Divisions by OMAX Method,” DIJEFA: Dinasti International Journal of Economics, Finance and Accounting, vol. 4, no. 2, pp. 314-325, 2023.

E. Maulana dan S. Perdana, “Analisis Produktivitas Departemen Servis pada PT TI dengan Metode Objective Matrix (OMAX),” Jurnal IKRA-ITH TEKNOLOGI, vol. 4, no. 3, pp. 21-30, 2020.

A. Wulandari, I. D. Anna dan I. Cahyadi, “Measurement Anda Strategy to Improve the Productivity of Madura's People's Salt Business with Objective Matrix (OMAX) and Traffic Light System (Case Study: People Salt Sumenep),” SITEKIN: Jurnal Sains, Teknologi dan Industri, vol. 21, no. 2, pp. 335-343, 2024.

A. Z. Fikri , D. Widada dan L. D. Fathimahhayati, “Implementation of Objective Matrix and Root Cause Analysis for Productivity Analysis PT. Indomarco Adi Prima SP Deket Lamongan,” IJIEM (Indonesian Journal Of Industrial Engineering & Management), vol. 4, no. 3, pp. 597-608, 2023.

R. Saputra dan D. T. Santoso, “Analisis Kegagalan Proses Produksi Plastik pada Mesin Cutting di PT. PKF dengan Pendekatan Failure Mode and Effect Analysis dan Diagram Pareto,” Barometer Jurnal Ilmu dan Aplikasi Teknik, vol. 6, no. 1, pp. 322-327, 2021.




DOI: https://doi.org/10.32520/stmsi.v14i2.5059

Article Metrics

Abstract view : 141 times
PDF - 16 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.