Prototype of IoT-based Gas and Temperature Monitoring System for Genset Room with ESP8266

Agus Pramono, Muhammad Zhiya Ulhaq, Gilang Dely Mukti

Abstract


Generator rooms require strict environmental monitoring to ensure operational safety, as uncontrolled temperature and gas concentration conditions may pose risks of fire and workplace accidents. This study aims to develop an Internet of Things (IoT)–based generator room monitoring system capable of automatically and real-time monitoring temperature, humidity, and gas levels, with notifications delivered via a Telegram bot. The research method adopts a systematic approach through prototype development. The system utilizes DHT22 and MQ-2 sensors, a NodeMCU ESP8266 microcontroller, a buzzer, and is integrated with the Telegram Bot API. The testing results demonstrate that the device is able to responsively monitor environmental parameters, transmit real-time data to Telegram, activate the relay with a response time of 4–5 seconds, and provide automatic notifications when gas concentrations exceed safe thresholds with a delay of 1–2 seconds. Evaluation of the monitoring functionality and sensor data visualization through the Telegram application indicates that all sensor information is successfully displayed via the Telegram bot interface. Although data transmission from the sensors to the Telegram application is highly dependent on network connection stability, the experimental results show that the system is capable of delivering data with optimal response time.

Keywords


Internet of Things (IoT); monitoring ruangan genset; Telegram bot; sistem peringatan

Full Text:

PDF

References


H. Romadhoni, G. Priyandoko, and D. U. Effendy, “Rancang Bangun Sistem Monitoring Genset Melalui Notifikasi Aplikasi Telegram,” JASEE J. Appl. SCI. Electr. Eng., Vol. 4, No. 2, pp. 33–43, 2023, DOI: 10.31328/jasee.

I. U. Turyadi, “Analisa Dukungan Internet of Things (IoT) terhadap Peran Intelejen dalam Pengamanan Daerah Maritim Indonesia Wilayah Timur,” J. Teknol. dan Manaj. Inform., Vol. 7, No. 1, pp. 29–39, 2021, Doi: 10.26905/jtmi.v7i1.6040.

A. Deani, E. Roselina, and A. Nurfikri, “Pemeliharaan Berkala Generator Set Rumah Sakit,” J. Vokasi Indones., Vol. 11, No. 1, 2023, DOI: 10.7454/jvi.v11i1.1189.

H. Y. P.Munthe, M. F. Hernando, and D. Amalia, “Optimalisasi Monitoring Peralatan Genset Manajemen Pemeliharaan, IoT, dan Desain,” J. Eng. Transp., Vol. 1, No. 1, pp. 1–16, 2023.

G. Tjahjadi, S. Alam, N. R. Yenita, and E. Z. Muttaqien, “Rancang Bangun Prototype Sistem Pengendali dan Monitoring Genset berbasis Internet of Things,” J. Kaji. Tek. Elektro, Vol. 7, No. 1, pp. 23–28, 2022, DOI: 10.52447/jkte.v7i1.5960.

Z. A. Al Qurniafan Hadi Jaya, “Desain Alat Monitoring Jarak Jauh Mesin Genset 300 kVA berbasis IoT,” Mars J. Tek. Mesin, Ind. Elektro dan Ilmu Komput., Vol. 3, No. 4, pp. 137–156, 2025, DOI: 10.61132/mars.v3i4.972.

J. D. Susatyono and Y. Fitrianto, “Sistem Monitoring Kualitas Udara dan Otomatisasi Pemberian Pakan Ayam berbasis IoT,” Krea-TIF, Vol. 9, No. 2, p. 1, 2021, DOI: 10.32832/kreatif.v9i2.5650.

M. M. Rizal, M. Ikhsan, and M. S. Hasibuan, “Sistem Pemantau Suhu dan Kelembapan Kandang Puyuh menggunakan Metode Logika Fuzzy Sugeno berbasis Internet of Things,” J. FASILKOM (teknologi Inf. dan ILmu KOMputer), Vol. 14, No. 1, pp. 242–249, 2024.

M. D. Ananda, Y. Saragih, and R. Hidayat, “Rancang Bangun Kandang Unggas berbasis IoT menggunakan Aplikasi Telegram,” J. Tek. Elektro dan Komputasi, Vol. 4, No. 2, pp. 196–206, 2022, DOI: 10.32528/elkom.v4i2.7349.

T. T. Septian, K. Sari, and F. Setiawan, “Pemantauan dan Pengendalian Lingkungan Ayam Peliharaan dengan Implementasi Kandang Ayam Pintar berbasis IoT,” J. Sist. Komput. Triguna Dharma (JURSIK TGD), Vol. 4, No. 2, pp. 49–59, 2025, DOI: 10.53513/jursik.v4i2.10523.

W. Halim and F. Ardiani, “Pengembangan Aplikasi Android untuk Monitoring Suhu dan Kelembaban berbasis Internet of Things,” J. Indones. Manaj. Inform. dan Komun., Vol. 5, No. 2, pp. 2070–2080, 2024, DOI: 10.35870/jimik.v5i2.824.

C. A. Putra, Y. Ridal, and others, “Analisa Utilisasi Generator Set Kapasitas 200 kVA di RSUD M. Natsir Kota Solok,” J. MESIL (Mesin Elektro Sipil), Vol. 5, No. 2, pp. 139–146, 2024, DOI: doi.org/10.53695/jm.v5i2.1142.

F. Diapoldo Silalahi, J. Dian, and N. Dwi Setiawan, “Implementasi Internet Of Things (IoT) dalam Monitoring Suhu dan Kelembaban Ruang Produksi Obat Non Steril menggunakan Arduino berbasis Web,” J. JUPITER, Vol. 13, No. 2, pp. 62–68, 2021.

I. W. Suriana, I. G. A. Setiawan, and I. M. S. Graha, “Rancang Bangun Sistem Pengaman Kotak Dana Punia berbasis Mikrokontroler NodeMCU ESP32 dan Aplikasi Telegram,” J. Ilm. Telsinas Elektro, Sipil dan Tek. Inf., Vol. 4, No. 2, pp. 75–84, 2022, DOI: 10.38043/telsinas.v4i2.3198.

S. D. Pratama, L. Lasimin, and M. N. Dadaprawira, “Pengujian Black Box Testing pada Aplikasi Edu Digital berbasis Website menggunakan Metode Equivalence dan Boundary Value,” J-SISKO TECH (Jurnal Teknol. Sist. Inf. dan Sist. Komput. TGD), Vol. 6, No. 2, p. 560, 2023, DOI: 10.53513/jsk.v6i2.8166.




DOI: https://doi.org/10.32520/stmsi.v15i1.5711

Article Metrics

Abstract view : 6 times
PDF - 0 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.